ProfiOffice Prolamic 330 Plus Bedienungsanleitung Seite 10

G.B. G.B.
At the completion of work, immediately feed the cleaning paper into the film inlet of the
laminator and repeat this process to adsorb the glue on the surface of rubber rolls. The
cleaning paper can be some thick paper (e.g. picture, poster, catalog, etc.)
Rubber roll
Max laminating thickness
Range of application laminating film 2x80 mic ~ 250 mic
Max width laminating
Preheat time
Temperature setting
Speed setting
Operating mode
Voltage
Power consumption
Dimension
Weight
Please note that by repairing mechanical or electric parts by not authorized persons by
ProfiOffice Germany, warranty will expire instantly.
This causes no liability by ProfiOffice Germany!
In case of service or support due warranty issues, please refer to your local seller.
WEEE-Reg.-Nr. DE 13567594
10
Cleaning and maintenance of machine
Technical data
4 pcs
Laminating film+ object to be coated = 1mm
330 mm
=3 min
up to 160°C
fixed 0.3 m/min
Temperature adjustment knob
220-240V
680 W
490x190x110 mm
4,9 kg
Disclaimer of warranty and liability
Service