Werbung
Verfügbare Sprachen
Verfügbare Sprachen
1. Place the pedal in a dry position.
2.Switch ON the power supply, and then set the on-off switch （red) to ON.
3. Turn the REVERSE switch (black) to UP and let the piston move to the top.
4. Tilt the cylinder and place the meat into the cylinder.
5.Place the cylinder back on the frame.
6. Turn the REVERSE switch(black)to DOWN and push the lower side of the footpad. The
piston will start to drop.
7. If the piston drops too fast or too slow, use the speed controller (knob) on the side
of the electric box to adjust to the appropriate speed.
8. When filling the housing, remove the foot from the pad and the piston will stop.
9. When the piston moves down to the bottom of the cylinder, the device will stop
automatically. Then turn the REVERSE switch (black) to UP to lift the piston to the top.
10. Repeat the process from 4 if necessary.
Reverse Button
Foot Pad Socket
1. Please unplug the power supply before cleaning.
2. Remove and clean all parts that come in contact with the sausage.
3. Wipe non-removable parts with a cloth to remove bacteria.
4. Lubricate moving parts and gears to extend product life.
5. Do not use corrosive or abrasive detergents for cleaning.
6. Store the machine in a dry, clean and secure place.
OPERATION
Variable Speed Controller
Speed Controller Switch
REPAIR AND MAINTENANCE
07
Power Switch
Werbung
