Samsung SCC-B9373P Bedienungsanleitung Seite 9

6. Bracket
Loosen the Pan/Tilt bolts of the bracket to adjust the camera direction.
In reference to page 3.
7. Connecting to Monitor and Power
- Set the impedance switch to the 75Ω standard position unless a video equipment is connected
to the monitor video out.
- Adaptor: AC24V / 1.5A or DC12V / 1.5A (AC24V / DC12V Model)
• Be sure to connect power after all the installation is done.
• Do not use power sources other than that specified.
troubleshooting
If you have trouble operating the camera, check the following guides for the
possible problem.
Nothing appears on the screen.
•
- Check the power connection and video signal line connection.
- Check the brightness level of DC Auto Iris volume of the camera.
The video image is not clear.
•
- Check if the camera glass has dust on the surface.
Clean the camera glass with a clean cloth or brush.
- Make sure that the screen is not exposed directly to a bright light.
Adjust the position of the camera if necessary.
- Check if protective film of camera glass is removed.
The screen is dark
•
- Adjust the brightness feature of the monitor.
- Check the brightness level of DC Auto Iris volume of the camera.
The screen does not properly display when IR LEDs work.
•
- Check if the camera glass has dust.
- Clean the camera glass with a clean cloth or brush.
If you cannot solve the problem with above guidelines, please contact an
authorized technician.
troubleshooting _05