Samsung SCC-B9373P Bedienungsanleitung Seite 8

installation
CAMERA INSTALLATION
Zoom and Focus Lever
•
- Loosen the Levers and adjust Zoom/Focus
After controlling, tighten each lever.
1. Zoom Lever
- To widen the viewing angle, turn the "Zoom Lever" to "W"(Wide)
- To obtain a closer view, turn this Lever to "T" (Tele).
2. Focus Lever
- To adjust the Focus between "N" (Near) or "
3. Ring Guide Bolt
• Be carefull not to lose these small bolts (3pcs) which should not be touched in normal
use.
4. DC Level Volume Screw Cap
• Remove this screw Cap carefully. Retain it in a safe place,
as it must be replaced to protect from water entering the camera body.
• The DC level volume for the adjustment in the screw hole.
- For a bright screen, turn the DC Level Volume slowly towards "H" (counter-clockwise) with the
driver provided.
- For a dark screen, turn it towards "L" (clockwise).
• Then tighten the screw Cap to protect water entering
5. Service Video Port Description
04_
installation
" (Far) until the sharpest focus is achieved.