Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Table of contents
1
Introduction
1.1
The product ....................................................................5
1.2 Symbols ...........................................................................5
1.3 Product overview ........................................................5
2
Safety
2.1
Safety definitions .........................................................5
2.2 General power tool safety warnings..................5
2.3 Work area safety ..........................................................6
2.4 Electrical safety ............................................................6
2.5 Personal safety .............................................................6
2.6 Power tool use and care ..........................................6
2.7 Battery tool use and care ........................................7
2.8 Service ..............................................................................7
2.9 Vibration and noise reduction ..............................7
2.10 Safety instructions for operation .........................7
3
Operation
3.1
To install a battery to the product .......................7
3.2 To start and stop the product ...............................7
3.3 To adjust the speed of the product ....................7
3.4 To use the product to polish a surface .............7
4
Transport
5
Storage
6
Maintenance
7
Troubleshooting
8
Discard
9
Technical data
1
Introduction
1.1
The product
5
The product is a battery-powered oscillating polisher. The
product is a part of the Meec Tools Multiseries 18 V.
Battery and battery charger are not included.
1.2
Symbols
5
Read the operating instructions carefully
and make sure that you understand the
instructions before you use the product.
Save the instructions for future reference.
This product complies with applicable EU
directives and regulations.
Recycle as electrical waste.
1.3
Product overview
7
Figure 1
1.
Power switch
2.
Display
3.
Increase speed button
4.
Decrease speed button
5.
Battery port
8
6.
Disc
8
2
Safety
8
2.1
Safety definitions
9
Warning! If you do not obey these instructions,
there is a risk of death or injury.
9
9
Caution! If you do not obey these instructions,
there is a risk of damage to the product, other materials
or the adjacent area.
Note! Information that is necessary in a given situation.
2.2 General power tool safety
warnings
Warning! If you do not obey these instructions,
there is a risk of death or injury.
Warning! Read all safety warnings and all instruc-
tions. Failure to follow the warnings and instructions may
result in electric shock, fire and/or serious injury.
EN
SV
NO
DA
PL
DE
FI
FR
NL
5
Werbung
