Care And Maintenance; Warranty Disclaimer - Hama Fc-10 Flex-Set Bedienungsanleitung

Warning
• Only use suitable charging devices or USB connections for charging.
• As a rule, do not use charging devices or USB connections that are defective and do not
try to repair them yourself.
• Now insert your terminal device with its back to the wireless charger (B).
• Charging starts as soon as an effective induction eld has been generated. The status
LED (2) begins to pulse in red. The current charging status appears on your terminal
device.
• If no connection can be established through induction, you may have to change the
position of your terminal device (B).
• Charging stops automatically once your device's battery is fully charged. The status LED
(2) is now steadily lit in green.
• Remove your terminal device from the wireless charger and disconnect the charger from
the power supply.
• If there are metal or magnetic objects on the charger, the status LED (2) will emit ashes
of alternating green and red light. After ashing ve times, the status LED (2) goes out.
Note – Car battery
With some vehicles, it can happen that power continues to be supplied even though the
ignition has been switched off. Therefore, when not using the product, disconnect it from
the power supply to protect your car battery from discharge.

5. Care and Maintenance

Only clean this product with a slightly damp, lint-free cloth and do not use aggressive
cleaning agents.
Note
Disconnect the device from the power supply before cleaning or if it will not be used for a
long period of time.

6. Warranty Disclaimer

Hama GmbH & Co KG assumes no liability and provides no warranty for damage resulting
from improper installation/mounting, improper use of the product or from failure to observe
the operating instructions and/or safety notes.
5