• 1 x USB-A to USB-C connecting cable
• These operating instructions
3. Safety Notes
• Protect the product from dirt, moisture and overheating, and only use it in a dry
environment.
• Do not drop the product and do not expose it to any major shocks.
• Do not operate the product outside the power limits given in the specifications.
• Do not use the product in areas where the use of electronic devices is not permitted.
• In order to prevent damage caused by overheating, make sure the product is not covered
by textiles, metal or other objects.
• Dispose of packaging material immediately according to locally applicable regulations.
• Do not modify the product in any way. Doing so voids the warranty.
• Use the product for its intended purpose only.
• Do not use the product in the immediate vicinity of heaters or other heat sources or in
direct sunlight.
• Use the item only in moderate climatic conditions.
• Keep this product, as all electrical products, out of the reach of children!
• Do not use the product in moist environments and avoid splashes.
• Do not bend or crush the cable.
• When using this product, observe the applicable local tra c laws and regulations.
• Take care that components such as airbags, safety areas, controls, instruments, etc. and
visibility are not blocked or restricted.
• Do not allow yourself to be distracted by the product when driving a vehicle. Always pay
attention to the surrounding tra c and your environment.
• Always pull directly on the plug when disconnecting the cable, never on the cable itself.
Do not put any bank cards or similar cards with magnetic strips,
or other magnetically sensitive objects, on the product.
The data on the cards could be damaged or deleted.
Warning
Ensure that there are no metal parts (for example, metal plate for magnetic holder) on the
back of your terminal device. Metal may heat up signi cantly in the eld of the induction
charger, causing damage to your terminal device and/or the charger.
3