Getting Started And Operation - Hama Fc-10 Flex-Set Bedienungsanleitung

Risk of electric shock
• Do not open the device or continue to operate it if it becomes damaged.
• Do not use the product if the charging cable, adapter cable or power cable is damaged.
• Do not attempt to service or repair the product yourself. Leave any and all service work
to quali ed experts.

4. Getting Started and Operation

Note
• To be able to charge your terminal device using the wireless charger, your terminal
device must be compatible with inductive charging technology. Please read the
operating instructions of your device.
• Note that the presence of mobile phone cases, covers or other materials between the
wireless charger and the back of your terminal device can interfere with charging or
even prevent it.
Note – 12-V/24-V vehicle electrical system
The charger is suitable for use with a 12-V or 24-V vehicle electrical system.
• Attach the wireless vehicle charger to your vehicle's ventilation grille using the included
ventilation grille mount (4).
• Connect the included USB-A to USB-C connecting cable to the USB-C input (1) on the
inductive charger and to the included vehicle power adapter (5).
• When the power supply is active, the status LED (2) lights up red.
• Adjust the holding brackets to the size of your smartphone using the adjustment lever
(3). You can easily move the lever by pressing it to release the locking mechanism.
• To adjust the holding brackets to your smartphone's size, rst set them to the maximum
open position.
• Then insert your smartphone into the charger and push the holding brackets together
using the adjustment lever until the smartphone is rmly seated in the holder.
• Release the lever to lock the holding arms in position.
• Thanks to the exible holding arms, you can now easily secure your smartphone in the
charger at any time, and take it out again. The holding arms always remain in the position
you have previously set.
4