Werbung
Verfügbare Sprachen
Verfügbare Sprachen
ENGLISH
Radio Text (RDS stations only)
When a radio station offering an RT
RT
service is tuned in, the RT indicator
lights to indicate that the RT service
can be received.
(Green)
FM
89.56.
To turn the RT mode on, press the
PANEL button on the remote contro!
unit until the RT indicator is lit in red.
(Refer to page 9)
When the station currently tuned in
RAR 3 af 0
is offering a radio text message ser-
vice the message scrolls on the dis-
(Green)
play.
The RT indicator
blinks in grean.
@ When the RT mode is turned on while an RDS radio station not offering an RT service is tuned in, "NO TEXT" flashes on the display,
then the mode automatically switches to the PS mode.
© In the same way, the mode automatically switches to the PS mode when the RT service is finished. In this case, the mode automati-
cally switches from the PS mode back to the RT mode when an RT broadcast is resumed.
® The RT mode cannot be set in the AM band or for FM stations not offering RDS broadcasts.
© To turn the RT mode off, press the PANEL button and switch to the desired display mode.
EON TA (RDS stations only)
When an RDS station is broadcasting RDS information on other stations within the same network and a traffic announcement begins
on another station in the same network based on this information (EON = Enhanced Other Network), that network station is automati-
cally tuned in. The previous station is tuned back in once the traffic announcement is over.
When EON TA function is not on
EON TA
while receiving EON TA information
the EON TA indicator lights in green.
(Green)
(STATION A)
Press the EON button once, then the
TA indicator turns on in Red.
(Refer to page 9)
(STATION A)
When a traffic announcement starts,
that station is automatically tuned in.
The EON TA indicator blinks in green.
(Green)
(STATION B)
When a traffic announcement
is
EON TA
over, the previous station is tuned in.
The EON TA indicator stops blinking
@
and remains lit in green.
(Green)
The EON TA function turns off.
{STATION A)
® The EON TA function cannot be turned on if the station currently tuned in is not an RDS station. If you attempt to do so, "NO RDS"
flashes on the display.
® If the RDS station currently tuned in does not provide an EON service, the EON TA function does turn on, but "NO EON" flashes
"on the display.
® To turn the EON TA mode off, press the EON button until the EON TA indicator turns off or lights in green, following the instructions
on page 9. if the EON TA mode is turned off under the conditions in 3 on the table above, Station B continues to be tuned in.
® Ifthe tuning button, preset button, band button, system power button or function button is pressed when this mode is set, the mode
is turned off.
@ "NO TP" appears on the display if no traffic announcement is being broadcast on the network of the station which is currently tuned
in.
,
12
When EON PTY function is not on
while receiving EON PTY informa-
tion, the EON PTY indicator lights in
Press the EON button twice, then
the EON
PTY indicator turns on in
RED.
{Refer to page 9)
The
programme
type flashes
for
approximately 5 seconds.
During this time, press the PTY
but-
ton to select the type of program.
(Refer to page 11.)
EON PTY
Once the desired programme type is
@
selected, set it with the MEMO but-
(Red)
ton.
,
(STATION
A)
(The set programme type lights, and its display turns back on after sev-
eral seconds. The programme type is set autornatically if the MEMO
button is not pressed within 5 seconds.)
When a programme of the specified
programme type begins on a station
EON) PTY
in the same network, that station is
G
tuned in.
<
The EON
PTY indicator blinks in
(Green)
green.
(STATION B)
WOR
The previous station is tuned back in
once a programme of a different pro-
gramme type begins.
The EON PTY indicator stops blink-
@
ing, remaining lit in green.
Green!
The EON PTY function also turns off.
¢
)
(STATION A)
@ The EON PTY function cannot be turned on if the station currently tuned in is not an RDS station. If you attempt to do so, "NO RDS"
flashes on the display.
© If the RDS station currently tuned in does not provide an EON service, the EON PTY function does turn on, but
"NO EON" flashes
on the display.
@ To turn the EON PTY mode off, press the EON button until! the EON PTY indicator turns off or lights in green, following the instructions
on page 9. If the EON PTY made is turned off under the conditions in 5 on the table above, Station B continues to be tuned in.
@ if the tuning button, preset button, band button, system power button or function button is pressed when this mode is set, the mode
is turned off.
@ When using the EON TA function together with the EON PTY function, press the EON button once after making the settings on the
above table. (Refer to page 9.}
© To reset the PTY after setting it, repeat the procedure from step 2.
NOTE:
1. Be sure to turn the EON TA and EON PTY modes off when recording programmes.
2. In the EON TA and EON PTY modes, if the station is switched from the current station to another station in the network but the signals
of that network station are weak and it cannot be tuned in properly, "WEAK" is displayed and the original station is immediately tuned
back in.
3.In the EON TA mode, the station does not switch to another station in the network if the current station is broadcasting a traffic an-
nouncement.
4. In the EON PTY mode, the station does not switch to another station in the network if the current station is broadcasting a programme
of the same programme type.
5. Since the RDS services offered differ from station to station, some RDS functions may not operate for some stations, but this isnot
a malfunction.
E
Werbung
