Upgrading Software - Samsung HT-J5150 Bedienungsanleitung

Settings
- When pressing the buttons on the primary
remote control, make sure that you have selected
the FM station using the primary remote control.
RDS DISPLAY
1
PTY - PTY SEARCH
4
1. Press the PTY SEARCH
to an FM station.
2. Press the PTY- or PTY+
code you want appears on the display.
~ The display gives you the PTY codes
described to the right.
3. Press the PTY SEARCH
PTY code selected in the previous step is still on
the display.
~ The centre unit searches 15 preset FM
stations, stops when it finds the one you have
selected, and tunes in that station.

Upgrading Software

The Software Upgrade menu allows you to upgrade
the product's software for performance improvements
or additional services.
~ Never turn the product off or back on manually
during the update process.
~ The update is complete when the product turns
off after restarting. Press the
turn on the updated product for your use.
1. Visit www.samsung.com.
2. Click OWNERS & SUPPORT on the top
right of the page, and then select Manuals &
Downloads from the drop down that appears.
3. On the next screen, enter the product's model
number into the search field. As you enter
the model number, a drop down will display
products that match the model number.
+
TA
2 3
PTY +
5 6
button while listening
button until the PTY
button again, while the
POWER button to
18
4. Left click your product's model number in the
drop down list.
5. On the page that appears, select Downloads.
6. Find the Upgrade File (USB type) in the
Description column. Click the ZIP icon in the
Download File column on the right.
7. Click Send in the pop-up that appears. The file
downloads to your PC.
8. Unzip the zip archive to your computer. You
should have a single folder with the same name
as the zip file.
9. Copy the folder to a USB flash drive.
10. Make sure no disc is inserted in the product,
and then insert the USB flash drive into the USB
port of the product.
11. In the product's menu, go to Settings >
Support > Software Upgrade.
12. Select By USB.
13. The home cinema searches for the software on
the USB drive. When it finds the software, the
Update Request pop-up appears.
14. Select OK. The home cinema turns off, turns on,
and then begins the upgrade. When the upgrade
is done, the home cinema turns off.
15. Press the POWER
cinema.
✎
There should be no disc in the product when you
upgrade the software using the USB Host jack.
✎
When the software upgrade is done, check the
software details in the Software Upgrade menu.
- English
button to turn on the home