Upgrading Software - Samsung HT-H5550 Bedienungsanleitung

Select Wi-Fi Direct, and then press the E
4.
button.
The Wi-Fi Direct devices that you can connect
to appear.
Settings
Display
Device Name : HT-H5500
Audio
Select your Wi-Fi Direct device to connect to.
Network
System
AndroidXXXXXXX
Language
Security
General
Support
5. You have three ways to complete the Wi-Fi
connection:
• Through the Wi-Fi device.
• Through the product using PBC.
• Through the product using a PIN.
Each is covered below.
Through the Wi-Fi Device
1. On the Wi-Fi device, follow the device's
procedure for connecting to another Wi-Fi
Direct device. See the device's user manual for
instructions.
2. When you have completed the procedure, you
should see a pop-up on your TV screen saying
that a device that supports Wi-Fi Direct has
requested to connect. Select OK, and then
press the E button to accept.
3. The Connecting pop-up appears, followed by
the Connected pop-up. When it closes, you
should see the device listed on the Wi-Fi Direct
screen as connected.
• The PBC and PIN procedures connect devices
automatically.
Through the Product Using PBC
1. Select the Wi-Fi Direct device you want to
connect to this product, and then press the E
button.
HT-H5500_00W_30_50_50W-ENG_0402.indd 23 HT-H5500_00W_30_50_50W-ENG_0402.indd 23
Wi-Fi Direct
Not Connected
Refresh
Close
23
2. The Connecting pop-up appears, followed by
the Connected pop-up. When it closes, you
should see the device listed on the Wi-Fi Direct
screen as connected.
Through the Product Using a PIN
1. Select the Wi-Fi Direct device you want to
connect to this product, and then press the E
button.
2. The PIN pop-up appears.
3. Note the PIN code in the pop-up, and then enter
it into the appropriate field in the Wi-Fi Direct
device you want to connect.
4. The Connecting pop-up appears, followed by
the Connected pop-up. When it closes, you
should see the device listed on the Wi-Fi Direct
screen as connected.
✎
The current wired or wireless network connection
will be disconnected when you use the Wi-Fi
Direct function.
✎
Text files, such as files with a .TXT or .DOC
extension, will not display when you are using the
Wi-Fi Direct function.

Upgrading Software

The Software Upgrade menu allows you to upgrade
the product's software for performance improvements
or additional services.
• Never turn the product off or back on manually
during the update process.
• The update is complete when the product turns
off after restarting. Press the
turn on the updated product for your use.
• Samsung Electronics takes no legal
responsibility for product malfunction caused by
an unstable Internet connection or consumer
negligence during a software upgrade.
1. In the Home menu, select Settings, and then
press the E button.
Select Support, and then press the E button.
2.
3. Select Software Upgrade, and then press the
E button.
- English
POWER button to
2014-04-02 2014-04-02 1:07:47 1:07:47