Upgrading Software - Samsung HT-ES6200 Bedienungsanleitung

Settings
3 · Select AllShare Settings, and then press the
E button.
4 · Select a device, and then press the E
button. The AllShare Settings pop-up
appears.
5 · Select Allow, Deny, or Delete from List, and
then press the E button.
The AllShare Settings screen only displays devices
if you have established networked connections
to AllShare devices. For more information about
AllShare networked devices, see pages 36~37.

Upgrading Software

The Software Update menu allows you to
upgrade the product's software for performance
improvements or additional services.
• Never turn the product off or back on manually during
the update process.
1 · In the Home menu, select the Settings, and
then press the E button.
2 · Select Support, and then press the E
button.
3 · Select Software Update, and then press the
E button.
4 · Select one of the following methods:
• Online
• By USB
• By Disc
• By downloaded
• Standby Mode Upgrade
5 · Press the E button.
Directions for each method begin below.
| NOTE |
\ The upgrade is complete when the product turns off, and
then turns on again by itself.
\ Samsung Electronics takes no legal responsibility for product
malfunction caused by an unstable Internet connection or
consumer negligence during a Software Update.
\ If you want to cancel the upgrade while the upgrade
software is downloading, press the E button.
34
|
English
HT-ES6200_XU_0314.indd 34 HT-ES6200_XU_0314.indd 34
Online
Your product must be connected to the Internet to
use the Online function.
1 · Select Online, and then press the E button.
The Connecting to Server message appears.
2 · If there is a download available, the Download
pop-up appears with a progress bar and the
download starts.
3 · When the download is complete, the
Upgrade Query window appears with three
choices: Update now, Update later or
Don't update.
4 · If you select Update now, the product
upgrades the software, turns off, and then
turns on automatically.
5 · If you do not make a selection in one minute
or select Update later, the product stores
the new upgrade software. You can upgrade
the software later using the By downloaded
function.
6 · If you select Don't update, the product
cancels the upgrade.
By USB
1 · Visit www.samsung.com.
2 · Click SUPPORT on the top right of the page.
3 · Enter the product's model number into the
search field, and then click Find Product.
4 · Click Get downloads in the centre of the
page below the Downloads header.
5 · Click Firmware in the centre of the page.
6 · Click the ZIP icon in the File column on the
right side of the page.
7 · Click OK in the pop-up that appears to
download and save the firmware file to your
PC.
8 · Unzip the zip archive to your computer. You
should have a single folder with the same
name as the zip file.
9 · Copy the folder to a USB flash drive.
10 · Make sure no disc is inserted in the product,
and then insert the USB flash drive into the
USB port of the product.
2012-03-14 오후 4:47:09 2012-03-14 오후 4:47:09