Herunterladen Inhalt Inhalt Diese Seite drucken

Samsung HT-J5150 Bedienungsanleitung Seite 17

5.1ch blu-ray
Vorschau ausblenden Andere Handbücher für HT-J5150:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

If you remove the USB device or Power Cable
during the recording process, the portion of the
file which has already been recorded may not play
back.
Recording will not start if the remaining free space
in the USB storage device is less than 2MB.
If the USB device is removed or has insufficient
space (under 2MB), the appropriate message is
displayed and the recording stops.
About RDS Broadcasting
Using the RDS (Radio Data System) to receive
FM stations
RDS allows FM stations to send an additional signal
along with their regular program signals.
For example, the stations send their station names,
as well as information about what type of program
they broadcast, such as sports or music, etc.
When tuned to an FM station which provides the RDS
service, the RDS indicator lights up on the display.
Description on RDS function
~ PTY (Program Type) : Displays the type of program
currently being broadcast.
~ PS NAME (Program Service Name) : Indicates the
name of broadcasting station and is composed of
8 characters.
~ RT (Radio Text) : Decodes the text broadcast by
a station (if any) and is composed of maximum 64
characters.
~ CT (Clock Time) : Decodes the real time clock from
the FM frequency. Some stations may not transmit
PTY, RT or CT information therefore this may not
be displayed in all cases.
~ TA (Traffic Announcement) : TA ON/OFF it shows
that the traffic announcement is in progress.
RDS may not operate correctly if the station tuned
is not transmitting RDS signal properly or if the
signal strength is weak.
To show the RDS signals
You can see the RDS signals the station sends on the
display.
Press the
RDS DISPLAY
FM station.
~ Each time you press the button, the display change
to show you the following information : PS NAME
 RT  CT  Frequency
PS (Program
Service)
RT (RadioText)
Frequency
About characters shown in the display
When the display shows PS,or RT signals,the
following characters are used.
~ The display window cannot differentiate upper case
and lower case letters and always uses upper case
letters.
~ The display window cannot show accented letters,
<A,> for instance, may stands for accented <A's>
like <À, Â, Ä, Á, Å and Ã.>
PTY (Program Type) indication and
PTY-SEARCH function
One of the advantages of the RDS service is that
you can locate a particular kind of program from the
preset channels by specifying the PTY codes.
To search for a program using the PTY codes
~ Before you start!
- The PTY Search is only applicable to preset
stations.
- To stop searching any time during the process,
press 5 button while searching.
- There is a time limit in doing the following steps.
If the setting is cancelled before you finish, start
from step 1 again.
17
- English
button while listening to an
While searching, <PS NAME>
appears and then the station
names will be displayed.
<NO PS> appears if no signal is
sent.
While searching, <RT> appears
and then text messages the
station sends will be displayed.
<NO RT> appears if no signal is
sent.
Station frequency (non-RDS
service)

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis