Upgrading Software - Samsung HT-E6750W Bedienungsanleitung

Upgrading Software

The Software Update menu allows you to
upgrade the product's software for performance
improvements or additional services.
• Never turn the product off or back on manually during
the update process.
1 . In the Home menu, select the Settings, and
then press the E button.
2 . Select Support, and then press the E
button.
3 . Select Software Update, and then press the
E button.
4 . Select one of the following methods:
• Online
• By USB
• By Disc
• By downloaded
• Standby Mode Upgrade
5 . Press the E button.
Directions for each method begin below.
| NOTE |
\ The upgrade is complete when the product turns off, and
then turns on again by itself.
\ Samsung Electronics takes no legal responsibility for product
malfunction caused by an unstable Internet connection or
consumer negligence during a software upgrade.
\ If you want to cancel the upgrade while the upgrade
software is downloading, press the E button.
Online
Your product must be connected to the Internet to
use the Online function.
1 . Select Online, and then press the E button.
The Connecting to Server message appears.
2 . If there is a download available, the Download
pop-up appears with a progress bar and the
download starts.
3 . When the download is complete, the
Upgrade Query window appears with three
choices: Update now, Update later or
Don't update.
HT-E6750W_XU_0222.indd 37 HT-E6750W_XU_0222.indd 37
4 . If you select Update now, the product
upgrades the software, turns off, and then
turns on automatically.
5 . If you do not make a selection in one minute
or select Update later, the product stores
the new upgrade software. You can upgrade
the software later using the By downloaded
function.
6 . If you select Don't update, the product
cancells the upgrade.
By USB
1 . Visit www.samsung.com.
2 . Click SUPPORT on the top right of the page.
3 . Enter the product's model number into the
search field, and then click Find Product.
4 . Click Get downloads in the centre of the
page below the Downloads header.
5 . Click Firmware in the centre of the page.
6 . Click the ZIP icon in the File column on the
right side of the page.
7 . Click OK in the pop-up that appears to
download and save the firmware file to your
PC.
8 . Unzip the zip archive to your computer. You
should have a single folder with the same
name as the zip file.
9 . Copy the folder to a USB flash drive.
10 . Make sure no disc is inserted in the product,
and then insert the USB flash drive into the
USB port of the product.
11 . In the product's menu, go to Settings >
Support > Software Update.
12 . Select By USB.
| NOTE |
\ There should be no disc in the product when you upgrade
the software using the USB Host jack.
\ When the software upgrade is done, check the software
details in the Software Update menu.
\ Do not turn off the product during the software upgrade.
It may cause the product to malfunction.
\ Software upgrades using the USB Host jack must be
performed with a USB flash memory stick only.
37
|
English
2012-02-22 오후 2:07:47 2012-02-22 오후 2:07:47