Cleaning And Storage - Lebenlang Lbl106 Benutzerhandbuch

third speed level.
• When the desired frothing or stirring result
is achieved, press and hold the button for
2 seconds to stop the motor. Then remove
the attachment, clean and dry it, and store
it for the next use.
• This device stops automatically after con-
tinuous operation for 5 minutes to prevent
overheating and damage. Users are ad-
vised to pause the operation as prolonged
use may lead to motor overheating and
shorten the device's lifespan.

CLEANING AND STORAGE

Use water and dish soap to clean the attach-
ments. Alternatively, they can be cleaned
in the dishwasher. The device body can be
wiped with a damp cloth. When not in use,
store the device in a cool and dry place.
CHARGING
• When the device body is connected to the
charging cable or placed in the charging
station, the device switches to charging
mode. In charging mode, the buttons are
automatically locked, and the product can-
not be operated.
• During charging, the red blinking LED in-
dicates that the battery is charging. When
the red light goes out, it means the product
is fully charged.
• If the milk frother is not used for an ex-
tended period, charge it every 3 months to
extend its lifespan.
14