osann Boost Isofi x Bedienungsanleitung Seite 13

1 . Press the button to release the depth adjustment of the Isofi x connectors
through the small opening at the front of the seat cover. Now push the
Isofi x connectors on the metal bar on the underside of the child car seat
completely out until they engage in the notch.
2 . Guide the Isofi x connectors to the corresponding holders on the car seat
and let them engage audibly. Make sure that both Isofi x indicators are
green.
3 . Now push the child car seat fully against the backrest of your car and
then pull the strap to adjust the depth of the Isofi x connectors to secure
the child car seat.
4 . Put your child in the child car seat.
5 . Buckle your child in by closing the buckle of the 3-point harness until
you hear a click.
6 . Make sure that the lap belt runs underneath the two armrests along the
green belt guides. The diagonal strap must run above the armrest.
7 . Pull on the diagonal strap to tighten it. Make sure that the straps are not
twisted.
Installation without Isofi x:
Alternatively, the child car seat can also be fi tted with the 3-point belt only.
Attaching the seat with the Isofi x connectors is not absolutely essential but
is recommended.
Removal of the child car seat:
Loosen the Isofi x connector buttons on both sides of the child car seat until
the two indicators show red and remove the child car seat from your car.
- 13 -
EN