VEVOR PZ-3240 Bedienungsanleitung Seite 18

B.No power during
operation or not up
to the rated power
power
C.Crimp not tight
D.Create many
scrap
E.Leakage on the
pressing head of
plunger
F.Running of the
motor but no power
output
or damaged.
1. No oil
2. Dirty,contaminants
inside of oil sac.
3. Inner leakage
1. Not up to rated power
2. Error select on the
pressing jaws
1. Error select crimping die
on the
1. Worn on the sealing kits
1. No oil in the oil sac
2. Air into the hydraulic
system
3. Cold oil
- 17 -
1. Fill oil
2. Return tool to manufacture
or distributor
3. Return tool to manufacture
or distributor
1. Refer the B
2. Return tool to manufacture
or distributor
1. Change reasonable
crimping die
1. Return tool to manufacture
or distributor
1. Fill or change the oil
2. Return tool to manufacture
or distributor
3. Use the tool under
-10℃-40℃