Aiper Scuba X1 Pro Bedienungsanleitung Seite 162

2. Press the button briefly to cycle through and choose one of the four cleaning
modes: Smart Mode, Floor Mode, Wall Mode, and Waterline Mode.
Once you have selected the desired cleaning mode, immediately place the device in
the pool. After being submerged for a short period, the device will initiate the selected
mode's cleaning task.
3. When the device is initially submerged, selecting a mode including pool floor
cleaning will trigger the mapping process. The device will clean along the pool's floor
contour to create an underwater map, without climbing the walls.
After a successful mapping, there's no need to do mapping again for the same pool.
However, before each cleaning, the device need to briefly move around the floor to
relocate.
360°
After the mapping is done, the device will automatically recognize the pool's shape
and initiate the -shaped cleaning route when cleaning the pool floor. Once cleaning
is finished, the device will return to the missed areas.
159