Herunterladen Inhalt Inhalt Diese Seite drucken

Noblex NF 10x42 R advanced Gebrauchsanleitung Seite 15

Mit laserentfernungsmesser
Vorschau ausblenden Andere Handbücher für NF 10x42 R advanced:
Inhaltsverzeichnis
Verfügbare Sprachen

Verfügbare Sprachen

In the upper display line, the direct distance of the target (2) is shown.
In the second line, in all modes, except the standard mode, the horizontal
distance to the target object "HD" (7) can be read. In standard mode, the tilt
angle of the device "
The illustrations for the various display representations can be found in the
front cover.
I Standard mode
IV Long distances
I.
Standard mode:
In this mode, the direct distance as well as the inclination angle of the de-
vice to the target is measured. This mode does not have its own symbol.
When the standard mode is activated and the device is swiveled up or
down before the second pressing of the " " switch-on button, the con-
tinuously changing tilt angle can be read in the field of view. The indi-
cated value is calculated from the angle between the measuring device,
target object and the horizontal (see back cover). If the switch-on button
is pressed again and the measurement was successful, the measured dis-
tance as well as the angle of inclination during the measurement are fixed
in the display.
II. Rain mode
:
In this mode, the direct distance of the device to the target object under
rain conditions is measured. By means of this program, the disturbing
raindrops that could falsify the measurement result are eliminated.
III. Close distances "Golf mode" :
In this mode, the direct distance of the device to the near target object is
measured. This mode is used e.g. for golf activities. As long as the target
has been clearly recognized by the device, the symbol " " is displayed. If
the target is not uniquely detectable for the device, i.e. if several targets
are within the detection range, the distance to the closest target is mea-
sured. The symbol that is displayed by the device in this case is "
IV. Long distances "Hunting mode"
In this mode, the direct distance of the device to the more distant target
object is measured. Any partially disturbing foreground objects such as
bushes, stones and branches are ignored in this mode. If a clear target
" (7) is displayed.
II Rain mode
V Complete display
mode
:
III Short distances
VI Brightness adjust-
ment in the complete
display mode
".
15
Inhaltsverzeichnis
loading

Inhaltsverzeichnis