Important Safety Instructions; Power Supply - Canon i-SENSYS MF4410 Handbuch Für Starter

Symbols Used in This Manual
WARNING
Indicates a warning concerning operations that may lead to death or injury to persons if not performed correctly.
To use the machine safely, always pay attention to these warnings.
CAUTION
Indicates a caution concerning operations that may lead to injury to persons if not performed correctly. To use
the machine safely, always pay attention to these cautions.
IMPORTANT
Indicates operational requirements and restrictions. Be sure to read these items carefully to operate the machine
correctly, and avoid damage to the machine or property.
Indicates an operation that must not be performed. Read these items carefully, and make sure not to perform the
described operations.
Keys and Buttons Used in This Manual
The following symbols and key names are a few examples of how keys to be pressed are expressed in this
manual.
▪ Operation panel keys: [Key icon] + (Key name)
Example: [ ] (Stop)
▪ Display: <Specify destination.>
▪ Buttons and items on the computer display: [Preferences]
Illustrations and Displays Used in This Manual
Illustrations and displays used in this manual are which of MF4570dn unless specified.

Important Safety Instructions

Please read these "Important Safety Instructions" thoroughly before operating the machine.
As these instructions are intended to prevent injury to the user and other persons or to prevent destruction of
property, always pay attention to these instructions and operational requirements.
Also, as it may result in unexpected accidents or injuries, do not perform any operation unless otherwise
specified in the manual.
Installation
WARNING
▪ Do not install the machine in a location near alcohol, paint thinner, or other flammable substances. If
flammable substances come into contact with electrical parts inside the machine, this may result in a fire or
electrical shock.
▪ Do not place the following items on the machine.
- Necklaces and other metal objects
- Cups, vases, flowerpots, and other containers filled with water or liquids
If these items come into contact with a high-voltage area inside the machine, this may result in a fire or
electrical shock. If these items are dropped or spilled inside the machine, immediately turn off the power
switches of the machine and computer (1) and disconnect the interface cable if it is connected (2). Then,
unplug the power plug from the AC power outlet (3) and contact your local authorized Canon dealer.
(2)
O F F
(1)
(3)
CAUTION
▪ Do not install the machine in unstable locations, such as on unsteady platforms or inclined floors, or in
locations subject to excessive vibrations, as this may cause the machine to fall or tip over, resulting in
personal injury.
▪ The ventilation slots are provided for proper ventilation of working parts inside the machine. Never place
the machine on a soft surface, such as a bed, sofa, or rug. Blocking the slots can cause the machine to
overheat, resulting in a fire.
▪ Do not install the machine in the following locations, as this may result in a fire or electrical shock.
- A damp or dusty location
- A location exposed to smoke and steam, such as near a cookery or humidifier
- A location exposed to rain or snow
- A location near a water faucet or water
- A location exposed to direct sunlight
- A location subject to high temperatures
- A location near open flames
▪ When installing the machine, gently lower the machine to the installation site so as not to catch your hands
between the machine and the floor or between the machine and other equipment, as this may result in
personal injury.
▪ When connecting the interface cable, connect it properly by following the instructions in this manual. If not
connected properly, this may result in malfunction or electrical shock.
▪ When moving the machine, follow the instructions in this manual to hold it correctly. Failure to do so may
cause you to drop the machine, resulting in personal injury.
e-Manual -> "Maintenance" -> "Transporting the Machine."

Power Supply

WARNING
▪ Do not damage or modify the power cord. Also, do not place heavy objects on the power cord or pull on or
excessively bend it. This can cause electrical damage, resulting in fire or electrical shock.
▪ Keep the power cord away from all heat sources. Failure to do so can cause the power cord insulation to
melt, resulting in a fire or electrical shock.
▪ The power cord should not be taut, as this may lead to a loose connection and cause overheating, which
could result in a fire.
▪ The power cord may become damaged if it is stepped on, fixed with staples, or if heavy objects are placed
on it.
2
(1)
(3)
O F F