Bosch GLM 50 C Professional Originalbetriebsanleitung Seite 39

OBJ_BUCH-2450-005.book Page 39 Thursday, August 25, 2016 8:38 AM
The left factor specifies how many times the defined length has already
been reached. The green arrows on either side of the display indicate
the reaching of a length for marking purposes.
1x 0.500m
0.500 m
Inclination Measurement/Digital Spirit Level
Select the inclination measurement/digital spirit level
The measuring tool automatically switches between two states.
The digital spirit level is used to check the horizontal or vertical align-
ment of an object (e.g. washing machine, refrigerator, etc.).
When the inclination 3° exceeds, the ball in the display lights red.
1°2°3°
Inclination measurement is used to measure a slope or incline (e.g. of
stairs, railings, when fitting furniture, laying pipes, etc.).
The left-hand side of the measuring tool serves as the reference level for
grade measurement. If the display flashes during measurement, the
measuring tool has been tipped too heavily to the side.
Memory Functions
The value or end result of each completed measurement is automatically saved.
Memory value display
Maximum 30 values (measured values or end results) can be retrieved.
Select the memory function
The number of the memory value is shown at the top of the display, the
4
corresponding memory value is shown at the bottom and the corre-
6.350 m
sponding measuring function is shown on the left.
7.620 m
Press button 3 [+] to browse forwards through the saved values.
8.890 m
430.16 m
3
Press button 8 [–] to browse backwards through the saved values.
If there is no value available in the memory, "0.000" is shown at the bottom of the dis-
play and "0" at the top.
The oldest value is located in position 1 in the memory, while the newest value is in
position 30 (when 30 memory values are available). When a further value is saved,
the oldest value in the memory is always deleted.
Bosch Power Tools
.
English | 39
.
1 609 92A 23J | (25.8.16)