Iwata SPRING JET IS800 Bedienungsanleitung Seite 6

Unpack the compressor and all components:
- Iwata Smart Jet Airbrush Compressor (IS850)
- Coiled Air hose
- Air Hose
- International Plugs (IS850SA only)
- Regulator and Moisture Trap Assembly
- Replacement Air Intake Filter
- Air Hose Adapters for use with Badger,
Aztec and Paasche Airbrushes (J003)
- Operating Instruction Manual
VOLTAGE CAUTION
- READ CAREFULLY -
If you bought the compressor in
the country you're going to use
it, it's completely ready to go.
If you're going to transfer the
compressor to another country
with a different voltage, you'll
need a plug adapter and the
appropriate power converter,
though this is not recommended.
WARNING: Using a plug
adapter and power converter
may cause unit to overheat.
Any issues resulting from
the use of a power adapter
and/or power converter
are not covered under the
ANEST Iwata-Medea warranty.
IS850 SMART JET — ASSEMBLY INSTRUCTIONS
1
4
5
Air Outlet
6
7
8
Moisture Drain Valve
Part
Number Item ID Description
1 IS130 Coiled Air Hose
2 DTI10 Straight Air Hose
3 ISRT1 Air Pressure Regulator
4 ISPG2 Air Pressure Gauge
5 ISOR2 Regulator O-Ring (Top)
6 ISOR1 Regulator O-Ring (Bottom)
7 ISMF1 Moisture Filter
2
3
9
10
Part
Number Item ID Description
8 ISMTG2 Moisture Trap Cup
9 ISPS1 Auto Stop Pressure Switch
10 ISAF1 Air Intake Filter
11 ISIC1 Air Intake Filter Cap
12 ISFT1 Rubber Stand
13 ISOS1 On/Off Switch
6
International Plugs
IS850SA Only
Handle
13
Condenser Cover
Fan Cover
Plug
12
11
DO NOT USE OIL
IN OR ON THE
COMPRESSOR