Iwata SPRING JET IS800 Bedienungsanleitung Seite 5

Unpack the compressor and all components:
- Sprint Jet Airbrush Compressor (IS800)
- Air Hose
- Replacement Air Intake Filter
- Air Hose Adapters for use with Badger,
Aztec and Paasche Airbrushes (J003)
- Operating Instruction Manual
VOLTAGE CAUTION
- READ CAREFULLY -
If you bought the compressor in
the country you're going to use
it, it's completely ready to go.
If you're going to transfer the
compressor to another country
with a different voltage, you'll
need a plug adapter and the
appropriate power converter,
though this is not recommended.
WARNING: Using a plug
adapter and power converter
may cause unit to overheat.
Any issues resulting from
the use of a power adapter
and/or power converter
are not covered under the
ANEST Iwata-Medea warranty.
IS800 SPRINT JET — ASSEMBLY INSTRUCTIONS
1
Air Outlet
2
3
4
Pressure/Moisture
Release Outlet
Pressure Adjustment Knob
(Drain Valve)
Part
Number Item ID Description
1 ISMT2 Moisture Trap Assembly
2 ISFOR1 Regulator O-Ring (Bottom)
3 ISMF1 Moisture Filter
4 ISMTG1 Moisture Trap Cup
5 SPG2 Pressure Gauge
5
6
Part
Number Item ID Description
6 ISAF1 Air Intake Filter
7 ISIC1 Air Intake Filter Cap
8 DTI10 Air Hose
9 ISFT2 Rubber Stand
10 ISOS1 On/Off Switch
5
Handle
10
Condenser Cover
Fan Cover
9
8
7
DO NOT USE OIL
IN OR ON THE
COMPRESSOR
Plug