Iwata SPRING JET IS800 Bedienungsanleitung Seite 10

IS850 SMART JET - COMPRESSOR TURNS ON AND OFF WHILE AIRBRUSH IS NOT SPRAYING AIR.
The compressor has an air leak. When this happens:
1. Spray all connections with a soapy water solution. Resulting bubbles indicate an air leak.
2. Tighten connections.
3. If bubbling doesn't stop, try wrapping threads with thread sealant tape (max 3 wraps only) or applying beeswax to the threads.
Both methods provide an airtight seal.
4. If the air leak is in the middle of an air hose the hose will need to be replaced.
COMPRESSOR SUDDENLY TURNS OFF
The thermal overload switch will turn off your compressor before it overheats. Switch will automatically reset as unit cools.
FOR ANY OTHER PROBLEMS OR ISSUES
Find a local service/repair center located on contact page at beginning of manual.
TROUBLESHOOTING
10