Iwata SPRING JET IS800 Bedienungsanleitung Seite 3

Before operation, read this manual as it includes
important warnings and cautions for safe operation.
Store in convenient place for immediate and future reading.
INSPECT PRODUCT/ACCESSORIES
• Check that model name is as ordered, with proper voltage for your region.
NOTE: Model/Voltage/Serial number label found most commonly on bottom side of compressor.
• Check that compressor and all included accessories are free of defect or damage.
NOTE: Refer to the following pages for items included with your compressor.
• Recommended for airbrush application only.
• Not recommended for outdoor use.
NOTE: Unit not designed for contact with water as it can cause a short circuit/fire or injury. During dry conditions compressor may intake
dust or other particles interfering in proper operation or lifespan.
• Not for use with respiratory and/or life support equipment.
• Use in temperatures between 32º-104ºF (0º-40ºC) during operation.
NOTE: Outside of these specified temperatures components may freeze or experience early wear/damage resulting in shorter lifespan of product.
• Use a properly grounded outlet.
NOTE: Use of non grounded outlets could result in electric shock or fire.
• Turn off unit and remove power plug from electrical source before performing maintenance or troubleshooting to avoid injury.
• Not to be used to compress gases other than air.
WARNING
3