HOMCOM YH2202R Bedienungsanleitung Seite 13

EN
3. Adjusting the Heater
Turns the Heater ON and OFF, pressing the button ⑥ on the remote or control panel.
Cycles the unit through the three settings:
'H2',High Heat. indicated icon on display.
'H1',Low Heat. Indicated icon on display.
Blower and Heater OFF, Indicated icon is off.
4. Adjusting the thermostat
● Press the Thermostat button ②&③ on the control panel to change the setting
temperature.
● The thermostat setting range is 15°C-30°C(59°F-86°F). The default temperature setting
is 25°C(77°F).
● The thermostat is adjustable by 1°C(1°F) increments by pressing the Plus or Minus"+ -".
5. Adjusting the brightness
● Press the Brightness button ⑦ on the remote control to change the brightness
between the 3 settings: High, Middle and Low. Indicated by the second digit on the
floating display changing to show:
"BH":high
"BC":middle
"BL":low
6. Bottom light setting
Press the bottom light setting button ④ to change the color, with 10 different color changes
available
CL01→CL02→CL03→CL04→CL05→CL06→CL07→CL08→CL09→CL10→CL01
7. Backlight setting
Press the backlight setting button ⑤ to change the color, with 11 different color changes
available
FL01→FL02→FL03→FL04→FL05→FL06→FL07→FL08→FL09→FL10→FL11→FL01
8.Timing function
Press the timer button ⑨ to set the timer. Press once to add 1 hour and set the range from
1 to 12 hours
Operation continued by remote control only
Setting the Time & Day (24 Hour Clock)
1. Press the Power button ① to turn the unit on.
2. Press & hold the Time Setting button ⑨.
13