Usb Interface - I.safe Mobile Is940.Rg Bedienungsanleitung

CONNECTING APPROVED ACCESSORIES
DANGER
Improper use poses risk of death or severe injuries!
Only connect accessories approved by i.safe MOBILE GmbH to the
device. Accessories approved by i.safe MOBILE GmbH can be found at
www.isafe-mobile.com/en/products
16-PIN ISM INTERFACE
Loosen the screw on the 16-pin ISM interface cover using the Screwdriver included in the
approved accessory package. Remove the cover as shown.
Connect the plug of the approved accessory to the 16-pin ISM interface as shown.
Hand-tighten the screws.
Check that the plug is seated correctly and securely.

USB INTERFACE

The USB interface is used for charging and data transfer.
Connect approved accessories or other devices to the USB interface only by using the
USB-C Cable or by using other equipment approved by i.safe MOBILE GmbH.
12-PIN DOCKING INTERFACE
The 12-pin docking interface is used for charging and data transfer via the optional
IS-DS940.1 Docking Station.
EN
17