Installing Accessories - I.safe Mobile Is940.Rg Bedienungsanleitung

INSERT/REMOVE microSD CARD
NOTICE
Proceeding incorrectly when inserting/removing the microSD card can damage the de-
vice and the microSD card. Switch off the device before inserting or removing a microSD
card. Do not charge the device while inserting or removing a microSD card.
Loosen the screws on the battery using the Torx Screwdriver provided.
Remove the battery from the battery compartment.
Insert the microSD card into the slot provided (2) with the gold-colored contacts facing down.
The device has a slot for a microSD card up to 512 GB.
Reinstall the battery. See section "Installing the battery".

INSTALLING ACCESSORIES

The Hand Strap is included with the device package.
Install the Hand Strap to the device.
Hand-tighten the screws using the Torx Screwdriver provided.
ATTACHING THE DEVICE TO A MONITOR MOUNT
You can mount the device to a monitor mount with Vesa standard 100.
NOTICE
Incorrect mounting to the monitor mount can cause damage to the device.
Note the maximum screw depth of 4,5 mm on the IS940.RG.
14
2