Function Keys - I.safe Mobile Is940.Rg Bedienungsanleitung

1
MOUNTING IS-AS1.1: Mounting for the optional IS-AS1.1 Active Stylus Pen.
2
LOCK DOCKING STATION
3
MICROPHONE
4
FUNCTION KEY RED: Optional function, e.g. SOS - function can be assigned via
Button App (system integrated).
5
FUNCTION KEY M1: Optional function, e.g. camera - function can be assigned via
Button App (system integrated).
6
FUNCTION KEY M2: Optional function, e.g. camera - function can be assigned via
Button App (system integrated).
7
USB INTERFACE: Connection for the USB-C Cable or for other equipment approved
by i.safe MOBILE GmbH. Also see sections "Charging" and "Connecting approved
accessories".
8
LOUDNESS CONTROL: Volume up/Volume down.
9
12-PIN DOCKING INTERFACE: Connection for the optional
IS-DS940.1 Docking Station.
10
POWER KEY: A long press switches the device on/off. A short press switches the stand-
by mode on/off.
11
16-PIN ISM INTERFACE: Connection for approved accessories. Also see section
"Connecting approved accessories".
12
SENSORS: Proximity sensor, light sensor.
13
FRONT CAMERA
14
MOUNTING HANDSTRAP
15
MOUNTING VESA STANDARD 100
16
LED FLASH
17
MICROPHONE
18
BACK CAMERA
19
BATTERY
20
LOUDSPEAKER

FUNCTION KEYS

The device has various freely programmable keys:
Function key M1
Function key M2
Function key red
You can assign a function to the freely programmable keys via the Button App installed on the
device. You will find the Button App in the menu item „Settings"
EN
11