Part 3: Functions; Operating Modes And Setting Of The On-Board Menu - Involight Led Rx350 Bedienungsanleitung

Part 3: Functions:

The device can be operated in automatic, music-controlled or in DMX mode. You can set and influence the
different operating modes and via the on-board menu. In DMX mode, the functions are controlled via 2 or 3
channels. You can control the "LED RX350" with any commercially available DMX controller.
Illustration 1. (Rear of housing):
3
.
1
.
2
.
1.POWER IN - IEC mains input
2.FUSE HOLDER - Fuse holder for F1A 250V fuse.
3.DMX IN - 3-pin male XLR socket for connecting a DMX control device (e.g. DMX mixer).
4.DMX OUT - 3-pin female XLR socket for forwarding the DMX control signal.
5.LED DISPLAY -
IMPORTANT NOTE: Replace the fuse only with a fuse of the same type and with the same values (printed on the
device). If the fuse blows repeatedly, please contact an authorized service center.

3.1 Operating modes and setting of the on-board menu:

The "LED RX350" has different operating modes, all of which can be set via the on-board menu (see illustration on
the back of the housing). Always press "Mode" until the function to be set is reached. With "Setup" you get to the
individual, adjustable values. Then set the desired values with "Up" and "Down". Familiarize yourself with these
settings in order to be able to operate the device optimally. You can set the following modes and functions:
All manuals and user guides at all-guides.com
4
.
Shows the operating
5
.
mode and the value
16
of individual functions.