Werbung
Verfügbare Sprachen
Verfügbare Sprachen
MAINTENANCE SERVICE
●
Our products are made of long-lasting and durable materials, and we
insist on perfect production process. Each product leaves the factory
after 35 procedures and 12 times of testing and inspection work, which
ensures that each product has excellent quality and performance.
Maintenance
To maintain the performance and appearance of the product, it is recom-
mended that the following product care guidelines be read carefully：
●
Be careful not to rub the product against rough surfaces or wear the
product, especially the sheet metal housing.
Please regularly check the product parts that need to be tightened
●
and connected. If found loose, please tighten it in time to ensure the
safe operation of the equipment. The external and internal parts of
the equipment in contact with various chemical media should be
frequently treated with anti-corrosion treatment such as rust removal
and painting to improve the corrosion resistance of the equipment
and extend its service life.
Comply with the safe operating procedures and do not overload the
●
equipment. The safety guards of the products are complete and
reliable.
Unsafe factors are to be eliminated in time. The circuit part should be
●
checked thoroughly and the aging wires should be replaced in time.
Adjust the clearance of various parts and replace worn (broken)
parts. Avoid contact with corrosive liquids.
When not in use, please store the product in a dry place. Do not store
●
the product in hot, humid, or non-ventilated places.
8
Werbung
