Philips AVENT SCD971/26 Bedienungsanleitung Seite 38

38
English
If your baby only makes soft sounds, the sensitivity of the Baby Unit needs to be
set to a high level on the Parent Unit.
The louder your baby sounds, the lower the sensitivity can be set on the Parent
Unit.
Note: In Audio and Video mode, you will have continuous sound when the
sensitivity level is set to the highest. Otherwise, low sounds will be muted.
Tip: The sensitivity level can be adjusted so you will always hear your baby
without the disruption of other sounds. When there is a lot of background noise,
turn down the sensitivity so that you will not hear these sounds through the
Parent Unit.
Press the confirm button to save the new setting.
Video mode
1 Press the mode button on the top left of the Parent Unit.
2 Press the confirm button to select the Video mode.
When the Video mode is activated, the display is always on.
Note: Set the sensitivity level to the highest to have continuous sound on the
Parent Unit.