The shot has not been saved.
•
The camera was switched off before the shot could be saved.
Shots on other memory cards are not displayed.
•
The shots on memory cards from other cameras will only be
displayed if the other camera also uses the DCF memory sys-
tem.
The shots cannot be transferred to the PC via the USB cable.
•
The camera is not switched on.
When the camera is connected to the computer for the first
time, no new hardware is found.
•
The USB connection on the PC is deactivated in the BIOS set-
tings.
•
Enable the port in the computer's BIOS settings. Refer to the
PC manual if necessary.
EN
127 of 132