Converting To Stroller Mode; Converting To Trailer Mode - Burley Bark Ranger Benutzerhandbuch Und Sicherheitshinweise

Converting to Stroller Mode

1
Pull fork as shown, then rotate wheel
down fully. Fork will automatically
secure into the locked position.
Flag Installation
1
Insert the flag into the flag mount
located on either handlebar receiver.
Ensure it is inserted completely.
BArK rAnGEr & BArK rAnGEr XL

Converting to Trailer Mode

WARNING
StroLLEr WHEEL MuSt ALWAYS BE
FoLdEd uP And ProPErLY LocKEd
Into trAILEr ModE, BEForE PuLLInG
BEHInd A BIcYcLE. FAILurE to PoSItIon
StroLLEr WHEEL In trAILEr ModE
BEForE cYcLInG couLd rESuLt In An
AccIdEnt And SErIouS InJurY or dEAtH.
note
the black tab that extends from the stroller mount towards the
flex connector is not a lever. It is a safety mechanism to prevent
the attachment of the trailer to a bicycle while the stroller wheel
is in its downward (strolling) position.
ENG DEU FRA
Pull fork down and rotate up into trailer mode
as shown. Fork will automatically lock into
trailer position when positioned correctly.
ESP
1
13
ASSEMBLY & uSE