Kawai MP6 Bedienungsanleitung Seite 91

NRPN MSB/LSB
Status 2nd Byte
BnH 63H
BnH 62H
n = MIDI channel number
mm = MSB of the NRPN parameter number
ll = LSB of the NRPN parameter number
NRPN numbers implemented in MP6 are as follows
NRPN # Data
MSB LSB MSB Function & Range
01H 08H mmH Vibrato Rate
01H 09H mmH Vibrato Depth
01H 0aH mmH Vibrato Delay
01H 20H mmH Cutoff
01H 21H mmH Resonance
01H 63H mmH Attack time
01H 64H mmH Decay time
01H 66H mmH Release time
* Ignoring the LSB of data Entry
* It is not affected in case of modifying cutoff if tone does not use the DCF.
RPN MSB/LSB
Status 2nd Byte
BnH 65H
BnH 64H
n = MIDI channel number
mm = MSB of the RPN parameter number
ll=LSB of the RPN parameter number
RPN number implemented in MP6 are the followings
RPN # Data
MSB LSB MSB LSB
00H 00H mmH llH
mm:00H-0cH (0~12 [half tone]),ll:00H
00H 01H mmH llH
mm,ll :20 00H - 40 00H - 60 00H (-8192x50/8192 ~ 0 ~ +8192x50/8192 [cent])
00H 02H mmH llH
mm:28H - 40H - 58H(-24 ~ 0 ~ +24 [half tone]), ll:Ignored(as 00H)
7fH 7fH -- --
Program Change
Status nd Byte
CnH ppH
n=MIDI channel number
pp=Program number
Pitch Bend Change
Status 2nd Byte
EnH llH
n=MIDI channel number
mm,ll=Pitch bend value
3rd Byte
mmH
llH
: 0H - fH (ch.1 ~ ch.16)
mm:00H - 7FH (-64 ~ 0 ~ +63)
mm:00H - 7FH (-64 ~ 0 ~ +63)
mm:00H - 7FH (-64 ~ 0 ~ +63)
mm:00H - 7FH (-64 ~ 0 ~ +63)
mm:00H - 7FH (-64 ~ 0 ~ +63)
mm:00H - 7FH (-64 ~ 0 ~ +63)
mm:00H - 7FH (-64 ~ 0 ~ +63)
mm:00H - 7FH (-64 ~ 0 ~ +63)
3rd Byte
mmH
llH
:0H-fH(ch.1 ~ ch.16)
unction & Range
Pitch bend sensitivity
Master fine tuning
Master coarse tuning
RPN NULL
:0H-fH(ch.1 ~ ch.16)
:00H - 7fH(0 ~- 127)
3rd Byte
mmH
:0H-fH(ch.1 ~ ch.16)
:00 00-7f 7fH(-8192~0~+8192)
Default = 40H
Default = 40H
Default = 40H
Default = 40H
Default = 40H
Default = 40H
Default = 40H
Default = 40H
Default=02H
Default = 00H
Default = 40 00H
91