Overview; Operation - Bosch MSM881664 Gebrauchsanleitung

en

Overview

These operating instructions refer to various
models. An overview of the different models
can be found on the illustrated pages
(Fig. C).
Overview
Please fold out the illustrated pages.
Figure A:
1 Base unit
2 Power cord
3 Speed control
Operating speed can be adjusted
steplessly between the lowest (●) and
highest (12) speed (only in conjunction
with button 4a).
4 ON button
a Controllable speed
(with speed control 3)
b Turbo speed
The hand blender remains switched
on as long as an ON button (a or b)
is pressed. The turbo speed is used
for the universal cutter (if included in
delivery).
5 Release buttons
To remove the blender foot,
simultaneously press both release
buttons.
6 Blender foot
Attach the blender foot and lock into
position.
7 Blender blade
8 Blender jug
Using the blender jug will prevent the
ingredients from splashing.
9 Lid
Place the lid on the blender jug to keep
in the processed food.
For some models:
10 Whisk with gear
11 Masher attachment with gear
12 Universal cutter XL with lid
13 Universal cutter L with lid and
ice crush blade
14 Multifunction accessory with tools
15 Multifunction accessory with tools
and dicer
10
03_MSM881664_8001028706.indb 10
If the universal cutter is not included with
the hand blender, it can be ordered from
customer service (order no. 753122). With
the universal cutter use the appliance at full
power to prepare honey spread (according
to the recipe). You can find the recipe in
the operating instructions of the universal
cutter. Place the lid on the universal cutter
to keep in the processed ingredients.

Operation

The appliance is suitable for blending may-
onnaise, sauces, mixed drinks, baby food,
cooked fruit and vegetables. For puréeing
soups.
Use the universal cutter for cutting/chopping
raw food (onions, garlic, herbs)!
It is recommended to use the supplied
blender jug. However, other suitable recep-
tacles can also be used.
Warning!
The bottom of the receptacle which you use
must not have any bumps or recesses.
Note: Before using the appliance for the
first time, clean all parts of it.
Figure B:
■ Completely unwind the power cord.
■ Place the blender foot on the base unit
and lock into position.
■ Insert the mains plug.
■ Place food in the blender jug or another
tall receptacle.
Info: The appliance works better if there is
some liquid in the ingredients.
■ Set the required speed with the speed
control (Fig. B-5).
Info: It is recommended to use a low speed
setting for liquids, hot food and for mixing
(e.g. muesli in yoghurt). The high speed
settings are recommended for the process-
ing of more solid foods.
■ Firmly hold the hand blender and jug
■ Switch on the hand blender by pressing
the required ON button.
03.12.2015 15:17:44