TERMOFOL TF-SWT400 Benutzerhandbuch Seite 17

4.5 Manual control via the button on the heater
4.5.1 Adjust desire temperature
Activate the power switch, press power button to power on the heater, adjust your desired temperature by
pressing "-" or "+" button.
4.5.2 Countdown timer
Press timer button and "00H" will appear on the screen and you can set the desired countdown timer by pres-
sing "-" and "+" button.
4.5.3 Child lock
Press and hold the "Power" button for 3seconds, the screen will show "CL" to activate the child lock function,
press and hold the "Power" button again to deactivate.
4.5.4 Open window detection
This heater is equipped with an open window detection function. If our control system detects that the room
temperature decreases dramatically in short period when the heater is in the heating status, it will recognise
that a window is open. The window sign on the screen will start to flash and the heater will power off for 30
minutes and get back to the previous setting automatically after 30 minutes. You can deactivate and activate
this function by long pressing for 5 seconds the "-" button on the heater, and the open window sign on the screen
will disappear and appear accordingly.
4.5.5 Temperature calibration
Power on the heater, Press and hold "+" button for 5 seconds to enter the temperature calibration, adjust the
number by pressing "-" or "+" button, the calibration ranges from -5 to +5 degrees.
4.5.6 WIFI reset
Power on the heater, press and hold "WIFI" button for 5 seconds until the WIFI indicator starts to flash to
reset the Wifi connection.
4.5.7 WIFI function ON/OFF
Power on the heater, press and hold "Timer" button for 10 seconds to deactivate the WIFI function of this heater
and the WIFI sign on the screen will disappear, long press "Timer" button for 10 seconds to activate it on again.
4.5.8 Mute the "Beep" sound during operation
Power on the heater, press the "Power" button until screen shows "OFF", press and hold the "-" button for
10seconds.
4.6 Remote controller operation
This heater also equipped with the remote controller, which you can use to operate:
• Set the desire room temperature
• Countdown timer
• Child lock (screen shows CL when child lock was activated)