TERMOFOL TF-SWT400 Benutzerhandbuch Seite 14

• DO NOT attempt to repair the heater by yourself, this will void your warranty.
• If the heater has been dropped do NOT operate it.
• This heater is designed to operate at 220V-240V, 50Hz AC. If your supply mains do not comply with this, do
NOT use the heater.
• The heater must not be located immediately below a socket-outlet.
2. HOW TO CARE FOR YOUR TERMOFOL HEATER
2.1 Cleaning
Always unplug your heater and let it cool down completely before cleaning. Never dip into water and never
splash water on it. Clean the heater with a soft damp cloth. Use a soft cloth and glass cleaner. Never use a wet
cloth and make sure to dry the heater when clean with a dry cloth. Do not use any abrasive materials, solvents or
harsh cleaning sponges as this could cause scratches or other irreparable damage. Before operating the heater
again it must be completely dry.
2.2 Using/Working
Please note that the heater may discolour with use. This is due to airborne pollution and is not a fault. Do not
cover your heater with a picture foil and do not paint or print the heater yourself. This might cause damage to
the heating element and will void your warranty. If you notice any noise, smells, visible changes or exceptionally
high temperatures please discontinue use and contact an authorised dealer.
2.3 Repair
Repairs must be carried out by Termofol directly. If you attempt to alter the product or to proceed with any
repairs yourself it will void your warranty.
2.4 Disposal
This marking indicates that this product should not be disposed with other household wastes
throughout the EU. To prevent possible harm to the environment or human health from un-
controlled waste disposal, recycle it responsibly to promote the sustainable reuse of material
resources. To return your used device, please use the return and collection systems or contact
the retailer where the product was purchased. They can take this product for environmental
safe recycling.