Honda WX15T Bedienungsanleitung Seite 37

36YH56000.book 34 ページ ２０１４年８月２８日 木曜日 午後１時４１分
4.Change the engine oil (see page 25).
5.Clean the air cleaner (see page 27).
6.Remove the spark plug, and pour about a tablespoon of clean engine
oil into the cylinder. Crank the engine several revolutions to distribute
the oil, and then reinstall the spark plug.
7.Pull the starter grip until you feel resistance and the notch on the
flywheel fin aligns with the mark on the fan cover. This closes the
valves so moisture cannot enter the engine cylinder, and protects the
engine from dust and corrosion. Return the starter rope gently.
8.Cover the pump to keep out dust.
34
Align the notch on the flywheel fin
with the mark on the fan cover.