Honda WX15T Bedienungsanleitung Seite 18

36YH56000.book 15 ページ ２０１４年８月２８日 木曜日 午後１時４１分
4.Check that all nuts, bolts, and screws are tightened.
Check for loose bolts, nuts and screws.
Tighten the bolts, nuts and screws properly and securely, if necessary.
5.Check the priming water.
Make sure that the pump chamber is filled with priming water up to its
filling level.
CAUTION:
Never attempt to operate the pump without priming water, or the pump
will overheat. Extended dry operation will destroy the pump seal. If the
unit has been operated dry, stop the engine immediately and allow the
pump to cool before adding priming water.
PRIMING WATER FILLER CAP
PRIMING WATER
FILLING LEVEL
15