Assembling The Upper Adapter; Using 1 Carrycot And 1 Seat; Using 2 Seats - Emmaljunga Inline Adapter Bedienungsanleitung

2) Assembling the upper adapter

1� Place the upper adapter into the
chassis attachment
2� Ensure that the clamp in the upper
plastic attachment clicks into the
telescopic bar�
3� Then click the lower part of the adapter
into the chassis attachment� The
adapter is correctly assembled when
the indicator shows green� Check that
the adapter is securely attached
WARNING
• There must be no child in the stroller
when the adapter is being assembled
or when the stroller is folded up or
down
• Avoid having children nearby when
the adapter is being assembled�
• Ensure that children are kept away
from all moving parts if you adjust the
stroller, as they could be injured�
• Never use the adapter if the indicator
shows red�
• Risk of pinching! Be careful when
attaching the adapter to avoid
pinching injuries�
USE OF THE INLINE ADAPTER
3) Use with 1 carrycot and 1 seat:
The carrycot must always be mounted in
the upper position, and the seat in the
lower position, as shown in the image�
Maximum load: 9 kg for the carrycot
and 15 kg for the seat� Always place the
heaviest child in the stroller first, followed
by the lighter child� Never let go of the
stroller's handle when using the stroller
with the Inline adapter�
1� Click the seat into the lower
attachment on the Inline adapter� The
footrest of the seat should be placed in
the basket� Attach the seat in the same
way as described in the main stroller
manual�
2� Click the carrycot into the upper
attachment� Always place the heaviest
child in the stroller first, followed by
the lighter child� Attach the carrycot in
the same way as described in the main
20
stroller manual�
3� To release the seat and carrycot from
the attachment, follow the same
steps as described in the main stroller
manual�
• Never use the stroller if any of the
indicators show red�
• Emmaljunga warns of an increased
risk of tipping when the Inline adapter
is used�
• Children's movements can suddenly
shift the weight and balance of the
stroller� On uneven surfaces like curbs
or stairs, the risk of tipping increases�
• The stroller becomes less stable if you
change the weight distribution on the
Inline adapter�
• Keep in mind that the risk of tipping
increases when you assemble,
remove, or place children in the
stroller�
• Never attach the carrycot or seat in
any way other than what is shown in
the image�
• Never let go of the handle!
• Never leave the child unattended!
• The brake should always be engaged
when you lift your child in or out�
• Never park the stroller on a slope�
• Always check that the stroller is
properly braked�
• This product is not intended for
jogging, skating, or inline skating�
4) Use of 2 seat units
Both seat units must always be placed
facing against the direction of travel, as
shown in the image� Maximum load: 15
kg per seat unit� Place the heaviest child
in the lower seat unit and the lighter child
in the upper seat unit� Always place the
heaviest child in the stroller first, followed
by the lighter child� Never let go of the
stroller's handle when using the stroller
with the Inline adapter�
1� Click the first seat unit into the lower
attachment on the Inline adapter� The
footrest should be placed in the tray�
Attach the seat unit in the same way as
described in the main stroller manual�
INLINE ADAPTER FOR SENTO MAX / SENTO LUX v.1.0
WARNING