VEVOR LY-RD0619 Bedienungsanleitung Seite 9

Step 5:
You can now enter your tent. Install door/window cover rods. Line up the
grommet on the base of the tent with the predrilled hole. (Fig J) Slide base
of rod through grommet and into base of tent, make sure rod is installed
completely. (Fig K, L) Note: They are meant to have a "bow" in them when
installed. They will be at an angle to the side when installed into the holes.
.
Step 6:
Place the hook end of rod through grommet on rain fly/shade cover with
the hook part facing outward and downward. (Fig M, N, O) Proceed to do
this on all 4 sides (If desired)
- 8 -