Reference Documents; Safety Instructions; Safety-Conscious Working - GEZE Powerturn Serviceanleitung

Powerturn smoke switch unit

Reference documents

à Powerturn installation and service instructions
à Powerturn wiring diagram
à Powerturn user manual
à Installation instructions FA GC150 and FA GC160
à Supplement GC151
Diagrams, drawings and instructions are subject to modifications. Use only the most recent version.
Observe the country-specific regulations for applications involving fire and smoke protection doors.
1

Safety instructions

It is important to follow these instructions for the safety of persons.
These instructions must be kept.
à Only specialists authorised by GEZE are permitted to carry out installation, commissioning and after-sales
service maintenance work.
à If unauthorised changes made to the system, GEZE cannot be made liable in any way whatsoever for any
resulting damages.
à GEZE is not liable if products from other manufacturers are used with GEZE equipment. In addition, only origi-
nal GEZE parts may be used for repair and maintenance work.
à Observe the latest versions of guidelines, standards and country-specific regulations, in particular:
à EN 14637 "Guidelines for hold-open systems"
à DIN VDE 100-600 "Installation of low-voltage systems - Part 6 Tests"
à DIN EN 60335-2-103 "Safety of electrical devices for home use and similar purposes; special requirements
for drives, for gates, doors and windows"
à Accident Prevention Regulations, in particular BGV A1 (VBG1) "General Regulations" and BGV A3 (VBG4)
"Electrical Installations and Resources"
1. 1 Installation details
à The drive is designed only for use in dry rooms.
Only use the cables prescribed in the cable plan provided. Lay shields in accordance with the wiring diagram.
X
Always use insulated wire-end ferrules for wire cores.
X
Insulate the wires that are not used.
X
Secure loose, internal drive cables with cable ties.
X
Observe the maximum permitted overall current drain required to supply the periphery.
X
à The Powerturn fire protection kit is required for operation of the smoke switch.
1.2

Safety-conscious working

Secure the workplace against unauthorised entry.
X
Watch the swivelling range of long system parts.
X
Secure the cover/drive shrouding against falling.
X
Before carrying out work on the electrical system, cut the voltage supply (mains and battery) and check to
X
ensure that there is no power. When using an uninterrupted power supply (UPS), the system will still be under
voltage even when disconnected from the mains.
à Risk of injury by moving parts (drawing in of hair, clothing, ...) when a drive is opened.
à Risk of injury caused by unsecured crushing, impact, drawing-in or shearing spots.
à Risk of injury caused by sharp edges in the drive.
à Risk of injury due to glass breakage.
1.3 Inspection of installed system
Measures for checking safety and prevention of crushing, impact, shearing or drawing-in spots.
X
Check the function of the presence sensors and movement detectors.
X
Check the protective earth connection to all metal parts that can be touched.
X
Safety instructions
9