Werbung
Verfügbare Sprachen
Verfügbare Sprachen
2. Installation
2.1- Turn Offthe power
To prevent electrical
the
main
fuse
or circuit
if the circuit breaker is off, some voltage may remainin the wires — before proceeding
with the installation, be sure no voltage is present in the Wiring. Take extra precautions
avoid accidentally turning thedevice on during installation.
2.2 - Connect the device exactly according to the diagrams shown
below
The dimmer
is available for 2-and-3 wired connection,
connection
port 3 and Load must be connected
2 -wired
ooeoo
connection
N wire
L Wire
2.3 - Turn the power back on,
3. Installation
For the SMARTdimmer to work optimally or suitable for your preference,you can
adjust the brightness
the MINJMAXJDimming Speedadjustment.
shock and/or equipment
breaker
before
installation
at the Min. and Max.
damage, disconnect
and
maintenance.
please mote in case of a 2-wired
to make stable dimming
3-wired
ooeoo
connection
N wire
L Wire
and also the dimming
electrical
power at
ge aware
that
to
possible.
speed With
Werbung
