Service Data; Installation - Electrolux EOB5414 Benutzerinformation

26 www.electrolux.com
Problem
The water in the cavity em‐
bossment does not boil.
The water comes out of
the cavity embossment.

11.2 Service data

If you cannot find a solution to the
problem yourself, contact your dealer or
an Authorised Service Centre.
The necessary data for the service
centre is on the rating plate. The rating
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)

12. INSTALLATION

WARNING!
Refer to Safety chapters.
Possible cause
The temperature is too low. Set the temperature at
There is too much water in
the cavity embossment.
plate is on the front frame of the
appliance cavity. Do not remove the
rating plate from the appliance cavity.
.........................................
.........................................
.........................................
12.1 Building In
Remedy
least to 110 °C.
Refer to "Hints and tips"
chapter.
Deactivate the oven and
make sure that the appli‐
ance is cold. Wipe the wa‐
ter with a cloth or sponge.
Add the correct amount of
water to the cavity em‐
bossment. Refer to the
specific procedure.
min. 550
20
600
min. 560
6
573
548
21
6
3
558
114
16
589
594