Werbung
Quicklinks
Deutschland:
EXSYS Vertriebs GmbH
Industriestraße 8
61449 Steinbach
www.exsys.de
Manual
EX-1339HMVS
USB 2.0 zu 8x RS-232/422/485
mit Überspannungsschutz
USB 2.0 to 8x RS-232/422/485
with 15KV ESD Surge Protection
Schweiz:
EXSYS Vertriebs GmbH
Dübendorfstrasse 17
8602 Wangen
www.exsys.ch
Anleitung
Vers. 1.2 / 27.02.25
Italia:
EXSYS Italia Srl
Via Belvedere, 45/B
I-22100 Como
www.exsys.it
Werbung
Verwandte Anleitungen für Exsys EX-1339HMVS
Inhaltszusammenfassung für Exsys EX-1339HMVS
- Seite 1 USB 2.0 zu 8x RS-232/422/485 mit Überspannungsschutz USB 2.0 to 8x RS-232/422/485 with 15KV ESD Surge Protection Deutschland: Schweiz: Italia: EXSYS Vertriebs GmbH EXSYS Vertriebs GmbH EXSYS Italia Srl Industriestraße 8 Dübendorfstrasse 17 Via Belvedere, 45/B 61449 Steinbach 8602 Wangen I-22100 Como www.exsys.de...
- Seite 2 EX-1339HMVS Inhaltsverzeichnis Beschreibung ···································································································· 3 Lieferumfang ····································································································· 3 Aufbau und Anschlüsse ····················································································· 4-5 Aufbau ························································································································ 4 Anschlüsse··················································································································· 5 Switch-Einstellungen ························································································ 6-8 Hardware Installation ·························································································· 9 Treiber Installation ·························································································· 9-10 Index Description ······································································································ 11 Extent of Delivery ······························································································ 11 Layout and Connections ················································································ 12-13 ·······································································································...
- Seite 3 Unterstützt wird 3-Draht RS-232, 4-Draht RS-422/485 und 2-Draht RS-485 • Wandmontagelaschen zur einfachen Befestigung • 15KV ESD Überspannungsschutz 2. Lieferumfang Bevor Sie den EX-1339HMVS an Ihren PC anschließen, überprüfen Sie bitte zuerst den Inhalt der Lieferung: • EX-1339HMVS • USB 2.0 Kabel (verschraubbar) •...
- Seite 4 Deutsch EX-1339HMVS 3. Aufbau und Anschlüsse 3.1 Aufbau Port 5 (S5): Port 6 (S6): RS-232/422/485 Betriebs LED RS-232/422/485 Port 7 (S7): RS-232/422/485 Port 8 (S8): RS-232/422/485 Port 4 (S4): RS-232/422/485 Port 3 (S3): USB B-Buchse RS-232/422/485 (verschraubbar) Port 2 (S2):...
- Seite 5 EX-1339HMVS Deutsch 3. Aufbau und Anschlüsse 3.2 Anschlüsse +7V ~ 24V T-Block: ACHTUNG!!! Schließen Sie niemals Strom an Ground an, dadurch kann Ihre Hardware zerstört werden!!! GND (Ground) +7V ~ 24V USB A-Buchse: USB 2.0 A-Buchse Signal Signal DATA+ DATA- USB B-Buchse: USB 2.0 B-Buchse...
- Seite 6 EX-1339HMVS 4. Switch-Einstellungen Es gibt 16 4-Pin DIP-Schalter auf der Unterseite der EX-1339HMVS. Davon sind 8 Dip-Schalter für den Modi (M1-M8) und 8 Dip-Schalter für die Terminierung (T1-T8) (siehe nachfolgendes Bild). Die Switche sind für die Zuordnung der Ports nummeriert. Beispielsweise für den Port 1 muss der Switch M1 oder T1 verwendet werden.
- Seite 7 EX-1339HMVS Deutsch 4. Switch-Einstellungen Mode Switch (M1-M8) RS-485-2W RS-485-4W RS-422 ECHO DIP-Schalter Beschreibung RS 485-2W RS-485 2-Draht Mode RS 485-4W (Werkseinstellung) RS 422 ECHO RS 485-2W RS 485-4W RS-485 4-Draht Mode RS 422 ECHO RS 485-2W RS-422 Mode RS 485-4W...
- Seite 8 Deutsch EX-1339HMVS 4. Switch-Einstellungen Terminator Switch (T1-T8) RXTM 120 Ohm zwischen RX+ und RX- 120 Ohm zwischen TX+ und TX- TXTM Keine Funktion Keine Funktion DIP-Schalter Beschreibung RXTM Beide Terminatoren für RX+/RX– und TXTM TX+/TX– sind inaktiv (Werkseinstellung) RXTM TXTM RX+/RX–...
- Seite 9 EX-1339HMVS Deutsch 5. Hardware Installation Beachten Sie bitte die folgenden Installationshinweise. Da es große Unterschiede zwischen PC‘s gibt, können wir Ihnen nur eine generelle Anleitung zum Einbau geben. Bei Unklarheiten halten Sie sich bitte an die Bedienungsanleitung Ihres Computersystems. 1. Schließen Sie das mitgelieferte USB-Kabel an die USB B-Buchse des Moduls an.
- Seite 10 Deutsch EX-1339HMVS 6. Treiber Installation ÜBERPRÜFEN DES INSTALLIERTEN TREIBERS Klicken Sie auf Start< >Ausführen< geben Sie “compmgmt.msc“ ein und klicken Sie auf >OK<. Wählen Sie nun >GeräteManager<. Dort müssten Sie unter „Anschlüsse (COM und LPT)“ mehrere neue Einträge z.B. „USB Serial Port (COM3)“ und unter „Universeller Serieller Bus Controller“...
- Seite 11 The scope of delivery includes a Din-Rail Kit (EX-6099), which allows the converter to be installed on a mounting rail in a 19” rack. The EX-1339HMVS can be extended by 14 modules. This allows you to connect up to 112 serial ports to your computer system. In addition, the EX- 1339HMVS is equipped with 15KV ESD overvoltage protection.
- Seite 12 English EX-1339HMVS 3. Layout and Connections 3.1 Layout Port 5 (S5): Port 6 (S6): RS-232/422/485 Power LED RS-232/422/485 Port 7 (S7): RS-232/422/485 Port 8 (S8): RS-232/422/485 Port 4 (S4): RS-232/422/485 Port 3 (S3): USB B-Port RS-232/422/485 (screw lock) Port 2 (S2):...
- Seite 13 EX-1339HMVS English 3. Layout and Connections 3.2 Connections +7V ~ 24V T-Block: ATTENTION!!! Never connect power to GND it will destroy your Hardware!!! GND (Ground) +7V ~ 24V USB A-Port: USB 2.0 A-Port Signal Signal DATA+ DATA- USB B-Port: USB 2.0 B-Port...
- Seite 14 EX-1339HMVS 4. Switch-Settings There are 16 4-pin DIP-switches on the bottom of the EX-1339HMVS. Of thes, 8 DIP-switches for the modes (M1-M8) and 8 DIP-switches for termination (T1-T8) (see picture below). The switches are numbered for the assignment of the ports. For example, for the port 1 must be used switch M1 or T1.
- Seite 15 EX-1339HMVS English 4. Switch-Settings Mode Switch (M1-M8) RS-485-2W RS-485-4W RS-422 ECHO DIP-Switch Description RS 485-2W RS-485 2-Wire Mode RS 485-4W (Factory Setting) RS 422 ECHO RS 485-2W RS 485-4W RS-485 4-Wire Mode RS 422 ECHO RS 485-2W RS-422 Mode RS 485-4W...
- Seite 16 English EX-1339HMVS 4. Switch-Settings Terminator Switch (T1-T8) RXTM 120 Ohm between RX+ and RX- 120 Ohm between TX+ and TX- TXTM No Function No Function DIP-Switch Description RXTM Both Terminator for RX+/RX– and TX+/ TXTM TX– are disable (Factory Setting)
- Seite 17 EX-1339HMVS English 5. Hardware Installation Because there are large differences between PC’s, we can give you only a general installation guide. Please refer your computer’s reference manual whenever in doubt. 1. Connect the USB cable (B-Plug) to the USB B-Port at the USB module.
- Seite 18 English EX-1339HMVS 6. Software Installation CHECK THE INSTALLED DRIVER Click at Start<>Run< then enter “compmgmt.msc“ and click at >OK<. In the windows that open select >Device Manager<. Under ”Ports (COM and LPT)“ you should find some new entry’s, for example „USB Serial Port (COM3)“. If you see this or similar entries the module is installed correctly.