Troubleshooting
Failure
The product cannot sweep large
garbage or leaves garbage behind
Dust coming out of the product
flanks
Dust leaks at fan
Trash not concentrated in the
middle
Brushes wear too fast
Main brush makes noise
Main brush does not turn
Battery not working properly
Battery working time is short
Disposing of Used Devices
Do not dispose of this device in municipal waste systems. Hand it over to an electric and electrical device recycling
and collection point. Check the symbol on the product, instruction manual and packaging. The plastics used to
construct the device can be recycled in accordance with their markings. By choosing to recycle you are making a
significant contribution to the protection of our environment.
Contact local authorities for information on your local recycling facility.
Parts
EN
Cause
Low brush pressure; worn
brushes; brushes tangled with
rope
Clogged filter; worn rubber strip
Damaged filter
Damaged front brush
Brush pressure too high
Main brush entangled with debris
Drive belt damaged
Motor burned; motor overloaded;
brush tangled; faulty bearing; high
brush pressure
Insufficient charging time; battery
connector oxidized or loose
1- Handle
2- Water inlet
3- Water tank
4- Nut
5- Trash can
6- Main wheel
7- Pulley
8- Side brush
Solution
Adjust brush pressure; replace or
lower brushes; remove debris
Clean filter; replace rubber strip
Replace filter
Replace front brush
Reduce brush pressure on the
ground
Clean debris
Replace drive belt
Replace battery; overhaul motor;
remove debris; replace bearing;
adjust brush pressure
Extend charging time; clean or
tighten connector