Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Hold the power tool only by the insu-
■
lated handles when you are carrying
out work in which the drill bit may
come into contact with concealed
power cables . Contact with a live cable
may also cause metal parts of the tool to
become live and could result in an elec-
tric shock.
Wear a dust mask .
■
Safety information for using long drill
bits with hammer drills
Always start drilling at a low speed
■
and with the drill bit in contact with
the workpiece. At higher speeds, the
drill bit can bend slightly if allowed to
turn freely without being in contact with
the workpiece, and this can lead to
injuries.
Do not exert excessive pressure and
■
only along the length of the drill bit (no
lateral pressure). Drill bits can bend and
break which can lead to a loss of control
and injuries.
WARNING! TOXIC DUST!
Working with the tool can produce
►
harmful/toxic dusts which represent a
health hazard for the person operating
the tool and for anyone else in the
vicinity.
CAUTION, PIPES AND CABLES!
■
DANGER!
Ensure that you are not likely to contact
power, gas or water supply lines when
you are working with the power tool. If
necessary, check with a service line de-
tector before you start to cut or drill into
a surface.
Original accessories/attachments
Only use the accessories and addi-
■
tional equipment that are specified in
the operating instructions and com-
patible with the appliance.
Before use
Charging the battery pack
CAUTION!
Always unplug the tool before you
►
remove the battery pack from or con-
nect the battery pack to the charger.
WARNING!
Observe the safety instructions and
►
the instructions on charging and
correct use given in the operating
instructions for your
battery and charger.
A detailed description of the charging
process and further information can
be found in these separate operating
instructions.
NOTE
Ideally, charge the battery completely
►
before use. You can charge the lithium-
ion battery at any time without short-
ening its service life. Interrupting the
charging process does not damage
the battery.
Never charge the battery pack if the
►
ambient temperature is below 10°C or
above 40°C. If a lithium-ion battery is
to be stored for an extended period,
the charge level should be checked
regularly. The optimum charge level is
between 50% and 80%. The storage
climate should be cool and dry, and
the ambient temperature should be
between 0°C and 50°C.
The recommended ambient tempera-
►
ture range for using tools and batteries
is between –5°C and 50°C.
If necessary, remove the battery from
♦
the appliance.
Slide the battery pack 6 into the
♦
charger z.
Plug the plug into the power outlet.
♦
series
|
7
GB / IE
Werbung
