Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Col Progr
Pr00-Pr48
cannot be
000 - 255
selected via IR
remote control
Pty1-4
Pty1-4
can only be
selected via IR
Jump/Fade
remote control
000 - 255
Red – 125 - 255
Green – 125 - 255
White Bal
Blue – 125 - 255
CW – 125 - 255
WW – 125 - 255
Hold
Emergency
Col Mac
White
Blackout
Hold
DMX Fail
Col Mac
White
Blackout
Temp xxC
Sys Info
Ver x.x
Dis Perm
ON/OFF/Lock
Batt M100
Batt M90
Batt M80
Batt Mode
Batt M70
Batt M60
Batt M50
Fix Hours
(****) h
Def.Set
YES/NO
Internal programs
000 – 255
with increasing speed
Internal programs Pty 1-4 via IR remote control
Red Green Blue
Pty 1
Pty 2
Cyan Magenta Yellow
Pty 3
Red Green Blue Cyan Magenta Yellow
Pty 4
Red Green Blue White
Jump (000 – 255)
Switching colors with increasing speed;
Fade (000 – 255)
Fading colors with increasing speed
White balance
Behavior in case of missing power supply (for mains operation)
Hold: holds the last setting,
Col Mac: pre-selected preset color,
White: white LEDs 100% on,
Blackout: LEDs go off
Behavior in case of missing DMX signal
Hold: holds the last received signal,
Col Mac: pre-selected preset color,
White: all LEDs 100% on,
Black out: LEDs go off
Internal temperature of the device
Software version
Display shutoff/key lock
ON - display does not shut off
OFF - shuts off the display after 30 seconds - press the Menu button to
reactivate the display.
Lock - shuts off the display permanently after 30 seconds and activates
the key lock (display indication: LOCK key lock activated) - press the
Menu key for 4 seconds to deactivate the key lock again.
Setting the output power of the device in % to achieve a
longer battery runtime
BattM100 - full LED power in battery mode
BattM90 – 90% LED power in battery mode
BattM80 – 80% LED power in battery mode
BattM70 – 70% LED power in battery mode
BattM60 – 60% LED power in battery mode
BattM50 – 50% LED power in battery mode
Battery runtime calculation: the estimated battery runtime, depending
on the selected operating and battery mode, is shown on the display
(BT:xx.xh) in hours. Please note that after changing the device settings,
it may take a few seconds for the remaining runtime to be recalculated
and displayed.
Operating hours
****.- displays the fixture hours. The display shows "****", "*" stands for
the number of hours.
Reset to factory settings
30/40
00159111, Version 1.0
Werbung
