Drivers Menu - Cemo Cm20 Installations- Und Benutzerhandbuch

6.1.5.4.4. TAGs and blocked codes list
Displays the list of all disabled badges. The number of the first
appears on the screen.
<OK>NEXT<NO>EXIT
Press to go through the list or
6.1.5.4.5. Unblock all vehicles
To re-authorize all TAGs or vehicle codes to fill up
.
Press and
6.1.5.4.6. Block all vehicles
Disable all TAGs or vehicle number - they will no longer be able
to refuel.
Press and
VEHICLES
Liste blocked
<001>
to exit.
VEHICLES
Authorize All
to authorize all.
VEHICLES
Block All
.

6.1.5.5. Drivers menu

These are the same functions as the vehicle menu, but relate to
identifying the driver and managing the driver codes.
6.1.5.5.1. Manage drivers codes
This function is used to modify or display the driver codes
which allow refueling and operator recognition when the CM20 is
in driver code mode. Factory codes are 0001 for driver 1, 0002 for
driver 2 ... 0099 for driver 99. The code is a number between 1
and 9999 and the maximum number of codes is 99.
7.1.5.5.2. List, modify drivers codes
It allows to display the driver codes stored in the CM20 and
their personalization.
Driver number 1 has the PIN code 0001, to change it, press
Enter a personalized 4 digits PIN code (ex : 1234)
The new PIN code has been saved.
DRIVERS
DRIVERS
DRIVERS
List/Modif.Pins..
Driver 01
0>Exit (0001)
Driver 01
----
Driver 01
1234
Driver 01
(1234)
19